Description
ROCKSOLID® natural look concrete sealer seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals and UV light. The water-base, film-forming formula provides a protective barrier to keep water out, protect against stains and extend the life of your concrete while leaving a natural look, low-gloss finish.
| Application Method | : | Bristle Brush, Spray |
| Application Temperature | : | 50 to 90 deg F |
| Boiling Point | : | 100 to 537 deg C |
| Color | : | Clear |
| Compositions | : | Ethylene Glycol Monobutyl Ether, Propylene Glycol Phenyl Ether, Tributoxyethyl Phosphate, Oxirane, methyl-, polymer with Oxirane, monobutyl ether |
| Coverage Area | : | 200 to 400 sq-ft |
| Curing Time | : | 72 hr |
| Density | : | 1.024 |
| Drying Time | : | 24 to 48 hr |
| Finish | : | High-Gloss |
| Flash Point | : | 94 deg C |
| Form | : | Liquid |
| Media | : | Alcohol Foam, Carbon Dioxide, Dry Chemical, Dry Sand, Water Fog |
| Net Content | : | 1 gal |
| Resin Type | : | Acrylic |
| Traffic Time | : | 4 to 6 hr |
| VOC Content | : | 91 g/L |
