All Product

The deck joist tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for the look of a bolted connection. Color    :    Black Fastening Method    :    Hex-Head Washer, Wood Screw Finish    :   …

The APDMW56 decorative washer installs easily with the structural wood screw and hex-head washer combination and can be used in a variety of wood-to-wood connections. Color    :    Black Finish    :    ZMAX Inside Diameter    :    9/16 in

Outdoor Accents flat L-strap from Simpson Strong-Tie® bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents structural screws and hex-head washers. Color    :   …

Outdoor Accents flat T-strap from Simpson Strong-Tie® bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents structural screws and hex-head washers. Color    :   …

Formulated for high-strength anchorage of threaded rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions, AT-XP adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge. When mixed properly, this low-odor formula is a…

The BCS allows for the connection of two 2X’s to a 4X post or three 2X’s to a 6X post. Double-shear nailing between beam and post gives added strength. The BC Series offers dual-purpose post cap/base for light cap or base connections. Finish    :    Galvanized Height    :    3 in Length…

Our industrial-grade driver bits are specially designed for a secure fit with the recess of Simpson Strong-Tie fasteners. Available in both square and six-lobe drive configurations, our bits will outperform sub-standard bits commonly prone to cam-out and stripping. Drive Size    :    T40 Drive Type    :    6-Lobe Length    :    1-3/4 in

Our industrial-grade driver bits are specially designed for a secure fit with the recess of Simpson Strong-Tie® fasteners. Available in both square and six-lobe drive configurations, our bits will outperform sub-standard bits commonly prone to cam-out and stripping. Drive Size    :    T20 Drive Type    :    6-Lobe Length    :    2 in

It is necessary to use the right driver bit to ensure optimum results with a quik drive system. The bits included in each box of quik drive screws should be sufficient to drive the entire box, however, variations in materials and driving techniques can shorten driver-bit life. Replacement bits are…

The CB column base helps connect posts to the concrete for a broad range of members. The bottom of its base plate is designed to be flush with the concrete. CB bases accommodate glulam and solid sawn members ranging from 4 x 4 up to 12 x 12. Finish    :   …

Designed for use in all cement backer boards, including HardieBacker?, Durock?, WonderBoard? and PermaBase?. The ANSI A108 compliant cement board screw is designed for ease of installation and long life. This fastener is equipped with a sharp point and a deep-recessed head to make installations fast and easy with fewer…

Designed for use in all cement backer boards, including HardieBacker?, Durock?, WonderBoard? and PermaBase?. The ANSI A108 compliant cement board screw is designed for ease of installation and long life. This fastener is equipped with a sharp point and a deep-recessed head to make installations fast and easy with fewer…

The CBSQ column base uses Strong-Drive® SDS heavy-duty connector screws, which allow for fast installation, reduced reveal and provide a greater net section area of the column compared to bolts. The 1 in standoff (included) meets code requirements for structural posts installed in basements or exposed to weather or water…

CBTZ is part of the concealed structural connector line that combines structural strength with invisibility. Designed to connect horizontal beams a top a vertical post, the CBTZ continues the structural load path into the foundation through the CPTZ. The simplistic cylindrical design allows installations with a common drill bit, eliminating…

Column caps provide a strong connection for column-beam combinations. Beam Width    :    5-1/4 x 5-1/2 in Fastener Size    :    5/8 in Fastener Type    :    Machine Bolt Finish    :    Stainless Steel Height    :    6-1/2 in Length    :    11 in Material    :    Steel Post/Joist Size    :    8-1/2 in Thickness    :    7 ga…

The CPS is a composite plastic standoff base designed for use with hollow or solid wood columns, both indoors and outdoors. The line includes bases for 4 x 4, 4 x 6, 5 x 5, 6 x 6, 8 x 8,10 x 10 and 12 x 12 columns. All sizes…

The CPTZ concealed post base provides a clean, concealed look while providing a 1 in standoff height above concrete. The 1 in standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. It is…

The CPTZ concealed post base provides a clean, concealed look while providing a 1 in standoff height above concrete. The 1 in standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. It is…